http://www.nuclearcareersonline.com/rss/jobsearch.asp en-us Our Client is a market leader in the development of subsea pressure management products for the Oil & Gas Industry. As part of their continued expansion at their new product centre in central Scotland (Stirling), we are looking for innovative engineers with experience in finite element analysis of low volume, high capital expenditure manufactured products. This is an excellent opportunity to work in a stimulating environment in a comapny which fosters ongoing training and development for all staff. Enquiries are welcome from candidates with a background in Oil & Gas, Petrochemical, Process and Nuclear sectors. Required experience: At least 3 years experience in a stress analysis role in one of the above/similar industry. Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2125 Thu, 29 Jul 2010 15:58:00 GMT We are working with a large, well respected oil & gas engineering organisation. Due to developments in their operations, they are looking to expand their design team. The role is draftsperson is a key part of that growth. Role: The position is one of the main points of contact between the engineers and designers who develop the design parameters based upon the product requirements determined by the sales teams, and the manufacturing plants who make the products in line with the drawings. The role is measured by the accurate interpretation parameters into effective designs and drawings that can be used to manufacture the products against time and quality requirements. Duties Perform general drafting duties as assigned by Engineering staff carrying out such duties as: •Take design parameters from designers and engineers and develop detail designs •Production and maintenance of Engineering Drawings for use in the manufacture, assembly, a Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2126 Thu, 29 Jul 2010 16:43:00 GMT We are working with a major oil & gas high-technology copmpany that is expanding its design team. They are looking for Mechanical Designers to help to deal with ever-increasing workloads. Role: The position is one of the main points of contact between the designers who develop the design parameters based upon the product requirements determined by the sales teams, and the manufacturing plants who make the products in line with the drawings. The role is measured by the accurate interpretation of design parameters into effective drawings that can be used to manufacture the products against time and quality requirements. Experience required: Must have proven experience in a Design / Drawing office, and have good knowledge of CAD and other PC drawing system packages. Ideally should have a working knowledge of ProE, AutoCAD, Genius and/or SDRC system packages. Education: Ideally should have an OND/HNC or equivalents in Mechanical Engineering or a Engineering Design, Drafting http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2129 Thu, 29 Jul 2010 18:45:00 GMT We are working with a major oil & gas company that is growing steadily and as a result, is looking for 3X Wireline Operators. The function of the Wireline Operator requires utmost dedication to the equipment that they will be directly responsible for. This involves pre and post job tool maintenance. It is their responsibility to ensure that all equipment requirements for pressure control, perforating and basic equipment are met prior to a job loadout. During an operation onshore or offshore they will be responsible for the operation of the wireline winch and the operation of the pressure equipment. There will be a requirement to handle explosives in order to conduct many of the services offered. Following an operation, along with the engineer it is of great importance that all equipment has the required preventative maintenance completed and backloaded safely. YOu must be able to travel to customer locations at short notice and perform operations / services as required un Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2130 Thu, 29 Jul 2010 22:27:00 GMT We are working with a leading oil & gas company that is steadily expanding. They are looking to recruit a Wireline Operations Manager with extensive knowledge of specialised Cased Hole and/or Open Hole equipment. The role has the following responsibilities. Control spending within the Division by reviewing all purchase requests ensuring full justification is provided and it fits with operational requirements on a daily basis. Ensure coding is appropriated to the correct cost center and all other relevant sections completed. Manage and monitor the working capital for the division. Responsibility for reviewing Logging P & L prior to submission to line manager on a monthly basis. Verify accurate actual and accrual revenue data to line manager and company accountant. Promote Wireline services product lines by using field experience and technical knowledge to provide solutions to customer problems at a technical level in the customer’s office or in-house when Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2131 Thu, 29 Jul 2010 22:49:00 GMT We are working with a leading company in the field of subsea/downhole engineering in the oil & gas industry. Due to continuing expansion, they are opening a new R&D site in Stirling in the Scottish central belt. There is a strong emphasis on design, development and proving new technology. To this end, they are currently recruiting mechanical engineers, designers and Finite Element Analysts. The role of mechanical engineer involves working together with a team of people to develop new technology (often from a clean sheet of paper) and taking it through the concept, design, analysis and prototype stages. There is a heavy emphasis on analysis work - so you would work closely with the finite element analysts (or even do some of this work yourself). The preferred background is for candidates with a degree level qualification in a relevant mechanical discipline + experience in subsea engineering. However, if you are suitably qualified and have good mechanical developmen Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2132 Fri, 30 Jul 2010 07:09:00 GMT Our client is a major oil & gas production company. They are looking for an HSEQ Advisor to provide sup[port to their growing Aberdeen-based operation. Job description is as follows: As a company that considers Health, Safety & the Environment of paramount importance, as HSEQ Advisor, you will have the opportunity to join a team which is central to our UK Operations. Reporting directly to the HSEQ Manager, a summary of the key duties include: Advise management on the HSEQ requirements for the operation, both onshore and offshore in terms of statutory, operating group, concession owners’ requirements and industry best practice. Monitor the operation of the company Management Systems and advise management of any deviations thereof. Establish and maintain good relations with the authorities, concession owners, and industry associations in respect of HSEQ matters. Similarly, ensure close co-operation with offshore and onshore personnel, contractors Health & Safety http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2133 Fri, 30 Jul 2010 07:10:00 GMT Key Duties Completing allocated overhead line projects from a design perspective in accordance with customer design requirements, programme, cost and quality. Act as Senior Design Engineer as directed by the Design Manager Overhead Lines Analyse Contract documents to ensure correct interpretation of customer s/consultants intentions and liaise as necessary to agree design requirements Design Safe systems, defined as the integrated structure/ overhead line /civil works , so that they may be supplied and constructed in accordance with contract documents and /or current Practices . Assist in analysis and and resolution of design problems. Provide designs, volumes and quantities as required for the estimated and target cost submissions such that upon acceptance , the budget , programme and specification can be achieved. Attens tests, as required , to verily the suitability of design . Provide necessary calculations and /or reports to justify test loads and results. Assi Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2134 Fri, 30 Jul 2010 09:42:00 GMT Our client is currently searching for a CDM Co-ordinator to conduct the Planning and Management of CDM Construction Projects as well as enforce CDM Regulations and CDM Designers Responsibilities. MOD SC Security Clearance is MANDATORY for this post. Knowledge: - Health, Safety and Environmental issues in construction including the CDM Regs 2007, and associated legislation and guidance; - The design and construction process including constructability assessments and lifecycle considerations; - Procurement and competence assessment processes; - Safety case requirements; - NII licence conditions; - Building Regulations and Fire safety legislative requirements; - Environmental considerations including BREEAM, Site Waste Management Plans etc. & - Common audit methodologies. Experience: - Application of CDM roles within wide range of project types, new build, refurbishment, utilities, decommissioning, demolition; - High hazard installations including radiol Health & Safety http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2127 Thu, 29 Jul 2010 16:48:00 GMT Our client is currently searching for an Electrical AutoCAD Engineer to draw electrical schematic diagrams / drawings and generate terminal and cable schedules from detailed drawings. MOD SC Security Clearance is MANDATORY for this post. Key Accountabilities: To develop electrical drawing techniques. Experienced electrical draughtsperson with system design experience. Will be responsible to the Senior Team Leader for the delivery of elements of the design to an agreed schedule as defined in the Project Plan. Will be required to demonstrate progress against the plan at regular intervals. Will have a working knowledge of leading edge systems and controls. Key Responsibilities: - To ensure that responsibilities with regard to the Company's Environment, Health, Safety, Security and Quality Standards are maintained; - To liaise with scientists and mechanical engineers on a technical level to clarify specification needs and ensure that requirements are met Design, Drafting http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2128 Thu, 29 Jul 2010 17:03:00 GMT As the project develops, the Design Authority function will: - be the intelligent customer for the safety case, through technical oversight during licensing, procurement, manufacture, construction, commissioning and operation; - understand and eventually own and control the safety case for the plant and technical detail of the plant design, function and performance; - assisting understanding how detailed design changes impact on the functional design of the NSSS; - maintain design integrity by ensuring modification proposals for the plant from EDF Engineering are consistent with the original design intent or fully justified as alterations; - assist the interface with the regulators on technical matters; - be fully effective by the time of fuel load on the first unit. PRINCIPLE ACCOUNTABILITIES: 1. To become a subject matter expert (mechanically) in the PWR design. This will include the steam generators for pressurised water reactors and the associated piping in a Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2101 Fri, 30 Jul 2010 09:27:00 GMT Our client is searching for a Mechanical Engineer to undertake design tasks as allocated by Engineering Managers / Senior Engineering Manager / Lead Engineer - Mechanical and deliver appropriate designs to agreed time, cost and quality requirements. MOD DV SECURITY CLEARANCE WILL BE REQUIRED FOR THIS POST Job / Role Purpose: 1) On a daily basis, undertake mechanical engineering design tasks as allocated by Engineering Managers / Senior Engineering Manager / Lead Engineer - Mechanical and deliver appropriate designs to agreed time, cost and quality requirements; 2) Contribute to inter-disciplinary design co-ordination and to project support activities including routine team liaison, reporting and activity planning; 3) As required, and as called for via the Lead Engineer – Mechanical, gain advice and approvals from the Facility Design Authority, Mechanical; & 4) Maintain active liaison with all Stakeholders. Key Accountabilities: - Generation of a Engineering Design, Drafting http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2104 Thu, 29 Jul 2010 16:51:00 GMT A large client of Matchtech's are looking for an experienced Pipe Stress Engineer. This is an important position and requires someone with the relevant background and experience. An experienced Piping Engineer is required to carry out surveys and estimates on piping works across various sites in the power industry. The client requires: Surveying experience Estimation experience A Mechanical Engineering degree or equivalent degree in relevant industry sector Experience in the use of PSA5. This is not essential but ideal. Alternatively a knowledge and understanding of Cesar 2 (II) would be required. A full UK driving licence is essential for this vacancy, as there will be a high demand to travel to various sites ONLY SUITABLE CANDIDATES WILL BE SUBMITTED TO THE CLIENT To apply for this position, candidates must be eligible to live and work in the UK Matchtech Group Plc is acting as an Employment Agency in relation to this vacancy. Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2114 Fri, 30 Jul 2010 09:30:00 GMT Our client is currently looking for an experienced practitioner/subject matter expert to lead and develop a team of nuclear specialists in their Warrington office. The role requires a proven track record in one of the organisations principle nuclear engineering competencies together with a desire to manage and expand their nuclear team. The candidate should have a proven track record in one of the following technical competencies: Nuclear safety case authorship and/or management Nuclear structural assessment, including elements of code compliance, fracture mechanics (R6) and high temperature creep (R5) Reactor performance and fault studies Critically, shielding or dosimetry The candidate will need to demonstrate technical leadership skills for the development and successful delivery of work programmes to address particular client problems. The successful candidate should have the desire to take line management responsibility for a diverse technical team, whos Management & Executive http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2115 Fri, 30 Jul 2010 15:32:00 GMT <p>Our client is one of the world's largest providers of professional technical services. With a global network of more than 160 offices they operate in over 20 countries. They are currently looking to recruit a Lead Planner based in South England, UK.</p> <p>As Lead Planner you will have experience of managing large teams on complex projects.</p> <p>The ideal candidate will have Security Cleared status gained within defence projects but this is not essential.</p> <p>This is a long term contract position with an immediate start.</p> <p>The salary for this position is negotiable.</p> <p>If you feel that you are well suited to the above opportunity and would like to find out more then please contact Orion Group for more information or apply by forwarding your current CV quoting reference 66879.</p> <p>Orion Group currently supplies over 3,500 personnel in roles including Oil & Gas, Renewables Engineering http://www.nuclearcareersonline.com/candidate/vacDetails2.asp?vacID=2071 Fri, 30 Jul 2010 09:44:00 GMT